72245LB10PFG
| Parameters | |
|---|---|
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
72245LB10PFG Overview
You can find FIFO memory chip in package TQFP .It is recommended that memory IC be mounted in the Surface Mount direction.High efficiency is possible with a supply voltage of 5V .FIFO means contains a total of 64 terminations.The operation pins are 64 pins.In order for FIFO design to operate, a maximum current of 60mA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.This gadget is self-contained in?FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.There are a total of 64 pins on this board.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .Components normally possess 5V power supplies.
72245LB10PFG Features
FIFOs category
Frequency at most
72245LB10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72245LB10PFG FIFOs Memory applications.
- Measurement Equipment
- TVs
- Code converters
- Look-up Tables
- Optical memories
- Data communications
- Industrial Systems
- HDD
- Smart Meter
- Emulators
