72245LB10PFG8
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
72245LB10PFG8 Overview
FIFO memory chip is included in the TQFP package.Mounting it in the Surface Mount way is recommended.Supply voltages of 5V are capable of achieving high efficiency.A total of 64 terminations are contained within FIFO means.There are 64 pins for operation.FIFO design requires a maximum current of 60mA to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.There is a self-contained gadget within FIFOs .There is a memory type OTHER FIFO in the IC of this part.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.The FIFO memory IC has a total of 64 pins.A frequency of 100MHz is sufficient to maintain good accuracy.During regular operation, the FIFO memory's maximum value is 100MHz .It is normal for the component to own 5V power supplies.
72245LB10PFG8 Features
FIFOs category
Frequency at most
72245LB10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72245LB10PFG8 FIFOs Memory applications.
- Code converters
- Computer networks
- Buses
- Game Consoles
- Disk Controllers
- Industrial Systems
- Optical memories
- Communications Systems
- IP Radio
- Programmable Logic Controller
