72245LB10TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB10TF8 Overview
The LQFP package contains FIFO memory chip.In this case, it is packaged in case number Tape & Reel .Mounting it Surface Mount is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.64 terminations are contained in FIFO means.64 pins are used for operation.In order to operate it, it requires 60mA volts of current.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget in FIFOs is self-contained.In this part, the memory type is OTHER FIFO .Low supply voltages, such as 4.5V V, may be required for operation.FIFO memory can handle a maximum supply voltage of 5.5V V.This FIFO memory IC is equipped with 64 pins in total.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .Normaly, the component is powered by 5V power supplies.
72245LB10TF8 Features
FIFOs category
Frequency at most
72245LB10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72245LB10TF8 FIFOs Memory applications.
- Buses
- Seismic Data Collection at Extreme Temperatures
- TVs
- PC peripheral
- Multimedia
- One assembly
- Consumer Systems
- Address mapping
- Programmable Logic Controller
- Tape controllers
