72245LB15J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB15J Overview
You can find FIFO memory chip in package PLCC .Mounting it in the Surface Mount way is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains 68 terminations.68 pins are used for operation.Its maximum operating current is 60mA .FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is OTHER FIFO memory type.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.A total of 68 pins are present on the FIFO memory IC.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.During normal operation, the FIFO memory's maximum value is 66.7MHz .It is normal for the component to own 5V power supplies.
72245LB15J Features
FIFOs category
Frequency at most
72245LB15J Applications
There are a lot of Integrated Device Technology (IDT) 72245LB15J FIFOs Memory applications.
- SPD for DDR3 Memory Modules
- Computer Systems
- Magnetic memories
- Digital buffering
- Firmware loaders
- SPI Bus Flash Memory Device
- Multimedia
- Smart Meter
- Thermal Management for DDR3 Memory Modules
- Battery Charger
