72245LB15JGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Packaging | Bulk |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72245LB15JGI Overview
PLCC is the package in which FIFO memory chip is contained.Bulk case is used for packaging.Mounting it in the Surface Mount way is recommended.High efficiency is possible with a supply voltage of 5V .A total of 68 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 68 pins.In order for FIFO design to operate, a maximum current of 60mA is required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.The gadget is self-contained and can be found in FIFOs .It has a OTHER FIFO memory type IC.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.FIFO memory can handle a maximum supply voltage of 5.5V V.Currently, it has 68 pins.It is capable of maintaining good accuracy with a frequency of 66.7MHz .Normally, the FIFO memory's maximum value is 66.7MHz .The component normally owns 5V power supplies.
72245LB15JGI Features
FIFOs category
Frequency at most
72245LB15JGI Applications
There are a lot of Integrated Device Technology (IDT) 72245LB15JGI FIFOs Memory applications.
- Portable Information Devices
- Video Processing
- Extended product-change notification
- Communications Systems
- General Data Collection Applications at Extreme High-Temperatures
- MP3 Interface for Automobile
- Multimedia
- Microprogramming
- Data communications
- Computer networks
