72245LB15JI
| Parameters | |
|---|---|
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
72245LB15JI Overview
FIFO memory chip can be found in the PLCC package.A Surface Mount mounting method is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.In FIFO means, there are 68 terminations.There are 68 pins for operation.Its maximum operating current is 60mA .In order to maximize efficiency, the supply voltage should be set to 5V .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.In FIFOs , there is a self-contained gadget.A OTHER FIFO memory type IC is used in the part.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.As a result, it contains a total of 68 pins.When the frequency is set to 66.7MHz it can maintain good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.Normally, 5V power supplies are owned by the component.
72245LB15JI Features
FIFOs category
Frequency at most
72245LB15JI Applications
There are a lot of Integrated Device Technology (IDT) 72245LB15JI FIFOs Memory applications.
- Signal processing
- Game Consoles
- A/D output buffers
- Data communications
- Telecommunication
- Data
- Switches
- Code converters
- SPD for DDR3 Memory Modules
- Portable Information Devices
