72245LB15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
72245LB15PF Overview
FIFO memory chip can be found in the TQFP package.Memory IC's recommended mounted way is Surface Mount .An input voltage of 5V results in high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.There are 64 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.70°C °C is the memory logic's maximum operating temperature that allows stable operation.In FIFOs , this gadget is self-contained.It has a OTHER FIFO memory type IC.Low supply voltages, such as 4.5V V, may be required for operation.FIFO memory can handle a maximum supply voltage of 5.5V V.A total of 64 pins are present on the FIFO memory IC.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .It is normal for the component to own 5V power supplies.
72245LB15PF Features
FIFOs category
Frequency at most
72245LB15PF Applications
There are a lot of Integrated Device Technology (IDT) 72245LB15PF FIFOs Memory applications.
- Disk Controllers
- Buses
- General Data Collection Applications at Extreme High-Temperatures
- High-speed graphics pixel buffer
- Extended product-change notification
- Queues for communication systems
- Character generators
- Seismic Data Collection at Extreme Temperatures
- Signal processing
- Test site
