72245LB15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB15PF8 Overview
This package is included in TQFP .Surface Mount is recommended as the mounting method.Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains 64 terminations.There are 64 pins on the operation pins.Its maximum operating current is 60mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained in FIFOs .It has a OTHER FIFO memory type IC.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.The memory logic's maximum supply voltage is 5.5V volts.As a result, it contains a total of 64 pins.In the presence of a 66.7MHz frequency, it can maintain good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.The component normally owns 5V power supplies.
72245LB15PF8 Features
FIFOs category
Frequency at most
72245LB15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72245LB15PF8 FIFOs Memory applications.
- Product traceability
- Notebook
- Alarm System
- Multi-stage synchronizer
- Network bridges
- Telecommunication
- SPI Bus Flash Memory Device
- Test site
- Code converters
- Tape controllers
