Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
64 |
Published |
2000 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
64 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
HTS Code |
8542.32.00.71 |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.8mm |
Frequency |
66.7MHz |
Time@Peak Reflow Temperature-Max (s) |
20 |
Pin Count |
64 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
60mA |
Max Supply Current |
60mA |
Frequency (Max) |
66.7MHz |
Access Time |
10 ns |
Organization |
4KX18 |
Density |
72 kb |
Standby Current-Max |
0.005A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Synchronous |
Word Size |
18b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
FWFT Support |
No |
Programmable Flags Support |
Yes |
Output Enable |
YES |
Cycle Time |
15 ns |
Height Seated (Max) |
1.6mm |
Length |
14mm |
Width |
14mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
72245LB15PFI8 Overview
TQFP is the package in which FIFO memory chip is contained.The recommended mounting way is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.The number of terminations in FIFO means is 64 .64 pin is used for operation.The maximum current required for its operation is 60mA .When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.There is a self-contained gadget within FIFOs .It has a OTHER FIFO memory type IC.FIFO may operate at a very low supply voltage, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.There are a total of 64 pins on this board.It maintains good accuracy at a 66.7MHz frequency.During normal operation, the FIFO memory's maximum value is 66.7MHz .Normally, 5V power supplies are owned by the component.
72245LB15PFI8 Features
FIFOs category
Frequency at most
72245LB15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72245LB15PFI8 FIFOs Memory applications.
- Microprogramming
- General Data Collection Applications at Low-Temperatures
- Communications Systems
- Game Consoles
- Analog-to-digital converters
- GPS Offender Tracking
- Battery Charger
- Laser Receiver System
- Extended product life cycle
- Extended product-change notification