72245LB15TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB15TF Overview
FIFO memory chip can be found in the TQFP package.Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.FIFO means contains a total of 64 terminations.FIFO design has 64 operation pins.In order to operate FIFO design, a maximum current of 60mA is required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is self-contained in FIFOs .In this part, the memory type is OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.Currently, it has 64 pins.It is capable of maintaining good accuracy with a frequency of 66.7MHz .For regular operation, the memory logic's maximum value is 66.7MHz .Normally, the component owns 5V power supplies.
72245LB15TF Features
FIFOs category
Frequency at most
72245LB15TF Applications
There are a lot of Integrated Device Technology (IDT) 72245LB15TF FIFOs Memory applications.
- IP Radio
- Computer Systems
- Optical memories
- General Data Collection Applications at Extreme High-Temperatures
- General Data Collection Applications at Low-Temperatures
- Video time base correction
- TVs
- Temporary storage elements
- Network switching/routing
- Consumer
