72245LB15TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB15TF8 Overview
FIFO memory chip is contained in the LQFP package.In this case, it is packaged in case number Tape & Reel .It is pointing in the direction of Surface Mount .A supply voltage of 5V allows for high efficiency.FIFO means contains 64 terminations.Operation pins are 64 .FIFO design requires 60mA amps of current to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.FIFOs contains this gadget in its entirety.The IC of the part is of the type OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.The FIFO memory IC has a total of 64 pins.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.The memory logic's maximum value is 66.7MHz for regular operation.Normaly, the component is powered by 5V power supplies.
72245LB15TF8 Features
FIFOs category
Frequency at most
72245LB15TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72245LB15TF8 FIFOs Memory applications.
- Desktop Computers
- IP Radio
- High-speed disk
- Smart Meter
- Communications
- Switches
- Event Recorder
- Cardiac Monitoring Device
- Address mapping
- PC peripheral
