72245LB15TFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB15TFI8 Overview
FIFO memory chip is contained in the LQFP package.There is a case Tape & Reel in which it is packaged.Mounting it Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.As a result of this, FIFO means contains 64 terminations.64 pin is used for operation.FIFO design requires a maximum current of 60mA to operate.A voltage of 5V should be used for FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.Currently, it has 64 pins.With a frequency of 66.7MHz , it exhibits good accuracy.For regular operation, the memory logic's maximum value is 66.7MHz .Normally, 5V power supplies are owned by the component.
72245LB15TFI8 Features
FIFOs category
Frequency at most
72245LB15TFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72245LB15TFI8 FIFOs Memory applications.
- Switches
- Test Equipment
- Test site
- Video
- Network bridges
- Consumer
- Industrial Systems
- Emulators
- Alarm System
- Cardiac Monitoring Device
