72245LB25J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB25J Overview
The PLCC package contains FIFO memory chip.The recommended mounting way is Surface Mount .An input voltage of 5V results in high efficiency.FIFO consists of 68 terminations, which indicates that FIFO means is empty.In the case of the operation pins, they are 68 pins.In order to operate FIFO design, a maximum current of 60mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .It operates at 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.This gadget is self-contained in?FIFOs .It has a OTHER FIFO memory type IC.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.The memory logic's maximum supply voltage is 5.5V volts.It has a total of 68 pins on it.With a frequency of 40MHz , it maintains good accuracy.A FIFO memory's maximum value of 40MHz can be used for regular operation.Components normally possess 5V power supplies.
72245LB25J Features
FIFOs category
Frequency at most
72245LB25J Applications
There are a lot of Integrated Device Technology (IDT) 72245LB25J FIFOs Memory applications.
- A/D output buffers
- Portable Information Devices
- General Data Collection Applications at Low-Temperatures
- High-speed graphics pixel buffer
- Fabrication Site
- Video time base correction
- Data communications
- Microprogramming
- Look-up Tables
- SPI Bus Flash Memory Device
