72245LB25J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX18 |
| Standby Current-Max | 0.005A |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB25J8 Overview
You can find FIFO memory chip in package PLCC .The recommended mounting way is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.A total of 68 terminations are contained within FIFO means.Operation pins are 68 .The maximum current required for its operation is 60mA .The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.This gadget is self-contained in?FIFOs .This part is equipped with an IC of type OTHER FIFO memory.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.An input voltage of 5.5V V is the maximum that FIFO memory can handle.It consists of a total of 68 pins.A FIFO memory's maximum value of 40MHz can be used for regular operation.There are normally 5V power supplies attached to the component.
72245LB25J8 Features
FIFOs category
Frequency at most
72245LB25J8 Applications
There are a lot of Integrated Device Technology (IDT) 72245LB25J8 FIFOs Memory applications.
- Measurement Equipment
- Queues for communication systems
- Buses
- Temporary storage elements
- Character generators
- Microprogramming
- HDD
- Thermal Management for DDR3 Memory Modules
- Consumer
- Digital buffering
