72245LB25JI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 72kB |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 18b |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB25JI Overview
The PLCC package contains FIFO memory chip.There is a 72kB MB memory on the FIFO chips, which can be used to store both applications and data.Mounting it in Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 68 terminations.68 pins are the operation pins.Its maximum operating current is 60mA .FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is OTHER FIFO memory type.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 5.5V volts.The FIFO memory IC is equipped with a total of 68 pins.Despite a frequency of 40MHz , it is capable of maintaining good accuracy.During regular operation, the FIFO memory's maximum value is 40MHz .The component normally owns 5V power supplies.By using 2 circuits, FIFO memory chip has greater flexibility.
72245LB25JI Features
72kB memory size
FIFOs category
Frequency at most
72245LB25JI Applications
There are a lot of Integrated Device Technology (IDT) 72245LB25JI FIFOs Memory applications.
- Battery Charger
- Game Consoles
- Data-acquisition systems
- GPS Offender Tracking
- Computer networks
- Multi-stage synchronizer
- Tape controllers
- PC peripheral
- IP Camera Buffer
- Magnetic memories
