72245LB25PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 8kB |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 18b |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB25PFI Overview
The TQFP package contains FIFO memory chip.It is possible to store data and applications on the FIFO chips as they have 8kB in their memory.Memory IC's recommended mounted way is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 5V .I found that it has 64 terminations in FIFO means.These are the 64 pins for operation.In order for FIFO design to operate, a maximum current of 60mA is required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.An operating temperature of 85°C °C is necessary for stable operation.In FIFOs , there is a self-contained gadget.It has a type OTHER FIFO memory IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.It consists of a total of 64 pins.Despite a frequency of 40MHz , it is capable of maintaining good accuracy.The memory logic's maximum value is 40MHz for regular operation.A component normally has 5V power supplies attached to it.Using 1 circuits allows for enhanced flexibility.
72245LB25PFI Features
8kB memory size
FIFOs category
Frequency at most
72245LB25PFI Applications
There are a lot of Integrated Device Technology (IDT) 72245LB25PFI FIFOs Memory applications.
- Down-Hole Energy Drilling
- Communications Systems
- Test Equipment
- GPS Offender Tracking
- Data-acquisition systems
- Computer Systems
- Analog-to-digital converters
- Multimedia
- Consumer Systems
- Cameras
