72245LB25PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB25PFI8 Overview
TQFP is a package that contains FIFO memory chip.The recommended mounting way is Surface Mount .An input voltage of 5V results in high efficiency.A total of 64 terminations are contained within FIFO means.64 pin is used for operation.FIFO design requires 60mA amps of current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .Keeping the temperature at -40°C degrees Celsius ensures its reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.The gadget is self-contained and can be found in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 5.5V V.Approximately 64 pins are attached to it.A frequency of 40MHz is sufficient to maintain good accuracy.For regular operation, the memory logic's maximum value is 40MHz .In normal circumstances, the component has 5V power supplies.
72245LB25PFI8 Features
FIFOs category
Frequency at most
72245LB25PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72245LB25PFI8 FIFOs Memory applications.
- Consumer
- Multimedia
- Thermal Management for DDR3 Memory Modules
- Switches
- Programmable Logic Controller
- Test Equipment
- Tape controllers
- Emulators
- Video
- Look-up Tables
