72245LB25TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB25TF Overview
The TQFP package contains FIFO memory chip.It is pointing in the direction of Surface Mount .It is possible to achieve high efficiency with a supply voltage of 5V .FIFO means contains a total of 64 terminations.64 pins are used for operation.In order to operate FIFO design, a maximum current of 60mA is required.In order to maximize efficiency, the supply voltage should be set to 5V .In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.70°C °C is the memory logic's maximum operating temperature that allows stable operation.There is a self-contained gadget within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.A total of 64 pins are present on the FIFO memory IC.It is capable of maintaining good accuracy with a frequency of 40MHz .There is 40MHz FIFO memory IC's maximum value for regular operation.There are normally 5V power supplies attached to the component.
72245LB25TF Features
FIFOs category
Frequency at most
72245LB25TF Applications
There are a lot of Integrated Device Technology (IDT) 72245LB25TF FIFOs Memory applications.
- Battery Charger
- Firmware loaders
- Down-Hole Energy Drilling
- Character generators
- Network bridges
- Alarm System
- Thermal Management for DDR3 Memory Modules
- Desktop Computers
- Seismic Data Collection at Extreme Temperatures
- Network switching/routing
