72245LB25TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB25TF8 Overview
You can find FIFO memory chip in the LQFP package.This FIFO memory chip is packaged as a Tape & Reel .Mounting it in Surface Mount is recommended.Supply voltages of 5V are capable of achieving high efficiency.The number of terminations in FIFO means is 64 .There are 64 pins for operation.There is a maximum current requirement of 60mA for its operation.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.An operating temperature of 70°C °C is necessary for stable operation.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 4.5V V, may be required for operation.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 64 pins on this FIFO memory IC.With a frequency of 40MHz , it exhibits good accuracy.Normally, the FIFO memory's maximum value is 40MHz .Normally, the component owns 5V power supplies.
72245LB25TF8 Features
FIFOs category
Frequency at most
72245LB25TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72245LB25TF8 FIFOs Memory applications.
- Event Recorder
- Portable Information Devices
- SPD for DDR3 Memory Modules
- High-speed disk
- Industrial Systems
- Portable Information Devices
- Computer networks
- Tape controllers
- Laser Receiver System
- Product traceability
