72251L10J8
| Parameters | |
|---|---|
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
72251L10J8 Overview
You will find FIFO memory chip in the PLCC package.Mounting it in Surface Mount is recommended.High efficiency is possible with a supply voltage of 5V .The number of terminations in FIFO means is 32 .32 pins are used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 50mA .Set the supply voltage to 5V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.A total of 32 pins are present on the FIFO memory IC.When the frequency is set to 100MHz it can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 100MHz .Normally, the component owns 5V power supplies.
72251L10J8 Features
FIFOs category
Frequency at most
72251L10J8 Applications
There are a lot of Integrated Device Technology (IDT) 72251L10J8 FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Communications
- Network bridges
- MP3 Interface for Automobile
- Character generators
- Extended product-change notification
- High-speed disk
- Alarm System
- Laser Receiver System
- Fabrication Site
