72251L10PF8
| Parameters | |
|---|---|
| Max Supply Current | 50mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 50mA |
72251L10PF8 Overview
The TQFP package contains FIFO memory chip.The recommended mounting method for this FIFO products is Surface Mount .With a supply voltage of 5V volts, high efficiency is possible.32 terminations are contained in FIFO means.As far as the operation pins are concerned, they are 32 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 50mA .A voltage of 5V should be used for FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.An operating temperature of 70°C °C is necessary for stable operation.In FIFOs , this gadget is self-contained.A OTHER FIFO memory type IC is used in the part.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.This FIFO memory IC is equipped with 32 pins in total.It maintains good accuracy at a 100MHz frequency.The memory logic's maximum value is 100MHz for regular operation.Normally, the component owns 5V power supplies.
72251L10PF8 Features
FIFOs category
Frequency at most
72251L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72251L10PF8 FIFOs Memory applications.
- Buses
- Computer networks
- Data-acquisition systems
- Portable Information Devices
- Optical memories
- Portable Information Devices
- Look-up Tables
- Network bridges
- Communications Systems
- Product traceability
