72251L10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Published | 2009 |
| Pbfree Code | yes |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Pin Count | 32 |
| JESD-30 Code | S-PQFP-G32 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 50mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX9 |
| Memory Width | 9 |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | RoHS Compliant |
72251L10PFG8 Overview
LQFP is the package in which FIFO memory chip is contained.Surface Mount is memory IC's recommended mounting method.It is possible to achieve high efficiency with a supply voltage of 5V .As a result of this, FIFO means contains 32 terminations.FIFO requires a minimum of 50mA current to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.An input voltage of 5.5V V is the maximum that FIFO memory can handle.There are a total of 32 pins on this board.It is recommended that the FIFO memory's maximum value be set to 100MHz .
72251L10PFG8 Features
Frequency at most
72251L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72251L10PFG8 FIFOs Memory applications.
- MP3 Interface for Automobile
- Network switching/routing
- Application that requires re-writable nonvolatile parameter memory
- High-speed disk
- General Data Collection Applications at Low-Temperatures
- Magnetic memories
- Data
- Optical memories
- SPI Bus Flash Memory Devices
- Character generators
