72251L15JI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72251L15JI Overview
This package is included in PLCC .Mounting it Surface Mount is recommended.A supply voltage of 5V is capable of producing high efficiency.FIFO means contains a total of 32 terminations.FIFO design has 32 operation pins.There is a maximum current requirement of 50mA for its operation.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.It operates at -40°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.The gadget is self-contained and can be found in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.There are a total of 32 pins on this board.When the frequency is set to 66.7MHz , the system can maintain good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .Normally, 5V power supplies are owned by the component.
72251L15JI Features
FIFOs category
Frequency at most
72251L15JI Applications
There are a lot of Integrated Device Technology (IDT) 72251L15JI FIFOs Memory applications.
- High-speed disk
- Portable Information Devices
- Signal processing
- Alarm System
- General Data Collection Applications at Low-Temperatures
- Game Consoles
- Firmware loaders
- Video Processing
- Data communications
- Desktop Computers
