72251L15JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72251L15JI8 Overview
This package is included in PLCC .The package comes in a case of Tape & Reel .It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 5V , high efficiency is possible.A total of 32 terminations can be found in FIFO means.32 pins are the operation pins.In order to operate it, it requires 50mA volts of current.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.An operating temperature of 85°C °C is necessary for stable operation.This gadget is self-contained in?FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 32 pins on this board.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.In normal circumstances, the component has 5V power supplies.
72251L15JI8 Features
FIFOs category
Frequency at most
72251L15JI8 Applications
There are a lot of Integrated Device Technology (IDT) 72251L15JI8 FIFOs Memory applications.
- Consumer
- Desktop Computers
- Communications Systems
- Computer Systems
- Portable Information Devices
- Laser Receiver System
- Data communications
- Test site
- MP3 Interface for Automobile
- Code converters
