Parameters |
Package / Case |
TQFP |
Number of Pins |
32 |
Packaging |
Tape & Reel |
Published |
2008 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.8mm |
Frequency |
66.7MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
32 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
50mA |
Max Supply Current |
50mA |
Frequency (Max) |
66.7MHz |
Access Time |
10 ns |
Organization |
8KX9 |
Density |
72 kb |
Standby Current-Max |
0.005A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Synchronous |
Word Size |
9b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
FWFT Support |
No |
Programmable Flags Support |
Yes |
Output Enable |
YES |
Cycle Time |
15 ns |
Height Seated (Max) |
1.6mm |
Length |
7mm |
Width |
7mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
72251L15PFGI8 Overview
The TQFP package contains FIFO memory chip.Tape & Reel case is used for packaging.A Surface Mount mounting method is recommended.With a supply voltage of 5V volts, high efficiency is possible.A total of 32 terminations are contained within FIFO means.There are 32 pins on the operation pins.FIFO design requires 50mA amps of current to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.An operating temperature of 85°C °C is necessary for stable operation.The gadget in FIFOs is self-contained.It has a OTHER FIFO memory type IC.Low supply voltages, such as 4.5V V, may be required for operation.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.As a result, it contains a total of 32 pins.With a frequency of 66.7MHz , it maintains good accuracy.During regular operation, the FIFO memory's maximum value is 66.7MHz .A component normally has 5V power supplies attached to it.
72251L15PFGI8 Features
FIFOs category
Frequency at most
72251L15PFGI8 Applications
There are a lot of Integrated Device Technology (IDT) 72251L15PFGI8 FIFOs Memory applications.
- Telecommunication
- Communications Systems
- Routers
- PC peripheral
- Test site
- Network bridges
- Data
- Alarm System
- Video Processing
- Video time base correction