72251L15PFI8
| Parameters | |
|---|---|
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
72251L15PFI8 Overview
TQFP is the package in which FIFO memory chip is contained.There is a case Tape & Reel in which it is packaged.It is pointing in the direction of Surface Mount .With a supply voltage of 5V volts, high efficiency is possible.32 terminations are contained in FIFO means.The operation pins are 32 pins.FIFO requires a minimum of 50mA current to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.An operating temperature of 85°C °C is necessary for stable operation.The gadget is self-contained and can be found in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.There are a total of 32 pins on this FIFO memory IC.A frequency of 66.7MHz is capable of maintaining good accuracy.During normal operation, the FIFO memory's maximum value is 66.7MHz .There are normally 5V power supplies attached to the component.
72251L15PFI8 Features
FIFOs category
Frequency at most
72251L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72251L15PFI8 FIFOs Memory applications.
- Data-acquisition systems
- Tape controllers
- Industrial Systems
- Consumer
- Seismic Data Collection at Extreme Temperatures
- Cameras
- Computer networks
- PC peripheral
- Computers
- Down-Hole Energy Drilling
