72251L25PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72251L25PFI Overview
FIFO memory chip is contained in the TQFP package.It is pointing in the direction of Surface Mount .A supply voltage of 5V allows for high efficiency.A total of 32 terminations are contained within FIFO means.In the case of the operation pins, they are 32 pins.FIFO design requires a maximum current of 50mA to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.Its maximum operating temperature of 85°C °C ensures stable operation.It is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.Approximately 32 pins are attached to it.It maintains good accuracy at a 40MHz frequency.Regular operation has a FIFO memory's maximum value of 40MHz .Normally, the component owns 5V power supplies.
72251L25PFI Features
FIFOs category
Frequency at most
72251L25PFI Applications
There are a lot of Integrated Device Technology (IDT) 72251L25PFI FIFOs Memory applications.
- Communications Systems
- Game Consoles
- Signal processing
- Firmware loaders
- Data communications
- Smart Meter
- General Data Collection Applications at Extreme High-Temperatures
- Product traceability
- Rate buffers
- Networking
