72255LA10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 100MHz |
| Access Time | 8 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72255LA10PFG Overview
The TQFP package contains FIFO memory chip.It is pointing in the direction of Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.As a result of this, FIFO means contains 64 terminations.FIFO design has 64 operation pins.FIFO design requires a maximum current of 80mA to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget in FIFOs is self-contained.A OTHER FIFO type memory IC is present in the FIFO memory chip.There is a possibility that FIFO may operate at a very low supply voltage, such as 4V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.As a result, it contains a total of 64 pins.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.There is 100MHz FIFO memory IC's maximum value for regular operation.Normaly, the component is powered by 5V power supplies.
72255LA10PFG Features
FIFOs category
Frequency at most
72255LA10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72255LA10PFG FIFOs Memory applications.
- Signal processing
- Down-Hole Energy Drilling
- Analog-to-digital converters
- Medical Monitoring Device
- Application that requires re-writable nonvolatile parameter memory
- Thermal Management for DDR3 Memory Modules
- Switches
- Event Recorder
- Video
- HDD
