72255LA10TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 100MHz |
| Access Time | 8 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.017A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72255LA10TF8 Overview
You can find FIFO memory chip in the LQFP package.You'll find it packaged in the shape of a Tape & Reel .The recommended mounting way is Surface Mount .With a supply voltage of 5V volts, high efficiency is possible.FIFO means contains a total of 64 terminations.FIFO design has 64 operation pins.The maximum current required for its operation is 80mA .When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget in FIFOs is self-contained.A OTHER FIFO memory type IC is used in the part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.It consists of a total of 64 pins.When the frequency is set to 100MHz it can maintain good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.There are normally 5V power supplies attached to the component.
72255LA10TF8 Features
FIFOs category
Frequency at most
72255LA10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72255LA10TF8 FIFOs Memory applications.
- Measurement Equipment
- Event Recorder
- Test Equipment
- Product traceability
- PC peripheral
- MP3 Interface for Automobile
- Network switching/routing
- SPD for DDR3 Memory Modules
- TVs
- Alarm System
