72255LA10TFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 100MHz |
| Access Time | 8 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72255LA10TFG8 Overview
You can find FIFO memory chip in package LQFP .The recommended mounting way is Surface Mount .With a supply voltage of 5V volts, high efficiency is possible.A total of 64 terminations are contained within FIFO means.There are 64 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 80mA .Set the supply voltage to 5V to ensure FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.There is a self-contained gadget within FIFOs .It has a type OTHER FIFO memory IC.Typically, FIFO would work at 4V volts, but it may also work at higher voltages.A maximum voltage of 5.5V volts can be applied to FIFO memory.The FIFO memory IC has a total of 64 pins.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.Normally, 5V power supplies are owned by the component.
72255LA10TFG8 Features
FIFOs category
Frequency at most
72255LA10TFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72255LA10TFG8 FIFOs Memory applications.
- Tape controllers
- A/D output buffers
- Portable Information Devices
- Alarm System
- Medical Monitoring Device
- Telecommunication
- High-speed disk
- Magnetic memories
- Multimedia
- Notebook
