72255LA15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.017A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72255LA15PF Overview
FIFO memory chip is included in the TQFP package.The recommended mounting way is Surface Mount .When the supply voltage is 5V , high efficiency is possible.A total of 64 terminations are contained within FIFO means.The operation pins are 64 pins.FIFO requires a minimum of 80mA current to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.In FIFOs , this gadget is self-contained.The IC of the part is of the type OTHER FIFO .Low supply voltages, such as 4V V, may be required for operation.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.Approximately 64 pins are attached to it.A frequency of 66.7MHz is sufficient to maintain good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.A component normally has 5V power supplies attached to it.Additionally, RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH can be generated with this FIFO memory.
72255LA15PF Features
FIFOs category
Frequency at most
72255LA15PF Applications
There are a lot of Integrated Device Technology (IDT) 72255LA15PF FIFOs Memory applications.
- IP Camera Buffer
- Telecommunication
- Application that requires re-writable nonvolatile parameter memory
- Data communications
- Multi-stage synchronizer
- Down-Hole Energy Drilling
- Communications
- Controlled baseline
- TVs
- Cameras
