72255LA15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.017A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72255LA15PF8 Overview
FIFO memory chip can be found in the TQFP package.It is recommended that memory IC be mounted in the Surface Mount direction.If the supply voltage is set to 5V , high efficiency can be achieved.In FIFO means, there are 64 terminations.As far as the operation pins are concerned, they are 64 pins.FIFO design requires 80mA amps of current to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget in FIFOs is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.Low supply voltages, such as 4V V, may be required for operation.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.There are a total of 64 pins on this FIFO memory IC.It maintains good accuracy at a 66.7MHz frequency.The memory logic's maximum value is 66.7MHz for regular operation.There are normally 5V power supplies attached to the component.It is also possible to generate RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH with the use of this FIFO memory.
72255LA15PF8 Features
FIFOs category
Frequency at most
72255LA15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72255LA15PF8 FIFOs Memory applications.
- Game Consoles
- Data communications
- Rate buffers
- Look-up Tables
- PC peripheral
- One assembly
- Code converters
- Computer Systems
- Test Equipment
- Buses
