banner_page

72255LA15PFI8

64 Terminations5V 64 Pin FIFO memory IC10 ns Min 4V VMax 5.5V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-72255LA15PFI8
  • Package: TQFP
  • Datasheet: PDF
  • Stock: 357
  • Description: 64 Terminations5V 64 Pin FIFO memory IC10 ns Min 4V VMax 5.5V V(Kg)

Details

Tags

Parameters
Access Time 10 ns
Organization 8KX18
Density 144 kb
Standby Current-Max 0.02A
Parallel/Serial PARALLEL
Sync/Async Synchronous
Word Size 18b
Memory IC Type OTHER FIFO
Bus Directional Unidirectional
Retransmit Capability Yes
Output Enable YES
Cycle Time 15 ns
Height Seated (Max) 1.6mm
Length 14mm
Width 14mm
Thickness 1.4mm
RoHS Status RoHS Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Contact Plating Lead, Tin
Mount Surface Mount
Package / Case TQFP
Number of Pins 64
Packaging Tape & Reel
Published 2009
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 64
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
HTS Code 8542.32.00.71
Subcategory FIFOs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.8mm
Frequency 66.7MHz
Time@Peak Reflow Temperature-Max (s) 20
Pin Count 64
Qualification Status Not Qualified
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4V
Element Configuration Dual
Nominal Supply Current 80mA
Max Supply Current 80mA
Frequency (Max) 66.7MHz

72255LA15PFI8 Overview


You will find FIFO memory chip in the TQFP package.Tape & Reel case is used for packaging.Surface Mount is memory IC's recommended mounting method.When the supply voltage is 5V , high efficiency is possible.The number of terminations in FIFO means is 64 .In the case of the operation pins, they are 64 pins.For its operation, 80mA is the maximum current required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.Its maximum operating temperature of 85°C °C ensures stable operation.It is self-contained in FIFOs .The IC of the part is of the type OTHER FIFO .FIFO may operate at a very low supply voltage, such as 4V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.The FIFO memory IC is equipped with a total of 64 pins.A frequency of 66.7MHz is sufficient to maintain good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.Normally, the component owns 5V power supplies.

72255LA15PFI8 Features


FIFOs category
Frequency at most

72255LA15PFI8 Applications


There are a lot of Integrated Device Technology (IDT) 72255LA15PFI8 FIFOs Memory applications.

  • PC peripheral
  • Controlled baseline
  • SPI Bus Flash Memory Device
  • Portable Information Devices
  • Measurement Equipment
  • Firmware loaders
  • Communications
  • Consumer Systems
  • Disk Controllers
  • Magnetic memories

Write a review

Note: HTML is not translated!
    Bad           Good