72255LA15TFI8
| Parameters | |
|---|---|
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX18 |
| Density | 144 kb |
72255LA15TFI8 Overview
LQFP is the package in which FIFO memory chip is contained.There is a case Tape & Reel in which it is packaged.Mounting it Surface Mount is recommended.When the supply voltage is 5V there is the possibility of high efficiency.As a result of this, FIFO means contains 64 terminations.FIFO design has 64 operation pins.FIFO design requires 80mA amps of current to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.In FIFOs , this gadget is self-contained.A OTHER FIFO type memory IC is present in the FIFO memory chip.If the supply voltage is very low, such as 4V V, FIFO may be able to operate.FIFO memory can handle a maximum supply voltage of 5.5V V.It has a total of 64 pins on it.It is capable of maintaining good accuracy with a frequency of 66.7MHz .There is 66.7MHz FIFO memory IC's maximum value for regular operation.A component normally has 5V power supplies attached to it.
72255LA15TFI8 Features
FIFOs category
Frequency at most
72255LA15TFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72255LA15TFI8 FIFOs Memory applications.
- Communications Systems
- Network bridges
- Signal processing
- Medical Monitoring Device
- TVs
- A/D output buffers
- Routers
- Network switching/routing
- Game Controller
- Character generators
