72255LA20PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.017A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72255LA20PFI Overview
FIFO memory chip is contained in the TQFP package.The recommended mounting way is Surface Mount .A supply voltage of 5V allows for high efficiency.As a result of this, FIFO means contains 64 terminations.The operation pins are 64 pins.For its operation, 80mA is the maximum current required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.85°C °C is the memory logic's maximum operating temperature that allows stable operation.It is self-contained in FIFOs .This part has a memory type of OTHER FIFO .If the supply voltage is very low, such as 4V V, FIFO may be able to operate.The memory logic's maximum supply voltage is 5.5V volts.Approximately 64 pins are attached to it.In spite of the frequency 50MHz , it is capable of maintaining a good level of accuracy.During regular operation, 50MHz is the FIFO memory's maximum value.Normally, the component owns 5V power supplies.This gadget can also generate RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH .
72255LA20PFI Features
FIFOs category
Frequency at most
72255LA20PFI Applications
There are a lot of Integrated Device Technology (IDT) 72255LA20PFI FIFOs Memory applications.
- TVs
- Firmware loaders
- Cameras
- Signal processing
- Code converters
- Queues for communication systems
- Laser Receiver System
- Temporary storage elements
- Analog-to-digital converters
- Consumer Systems
