72255LA20TF8
| Parameters | |
|---|---|
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.017A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
72255LA20TF8 Overview
FIFO memory chip is contained in the LQFP package.In this case, it is packaged in case number Tape & Reel .The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.FIFO means contains a total of 64 terminations.These are the 64 pins for operation.Its maximum operating current is 80mA .A 5V supply voltage will ensure FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 4V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.This FIFO memory IC is equipped with 64 pins in total.In the presence of a 50MHz frequency, it can maintain good accuracy.A FIFO memory's maximum value of 50MHz can be used for regular operation.A component normally has 5V power supplies attached to it.Using this gadget, RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH can also be generated.
72255LA20TF8 Features
FIFOs category
Frequency at most
72255LA20TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72255LA20TF8 FIFOs Memory applications.
- Programmable Logic Controller
- Consumer
- Smart Meter
- Test site
- Address mapping
- Communications Systems
- Data-acquisition systems
- Cardiac Monitoring Device
- Wireless
- Video time base correction
