72261LA15TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Max Supply Current | 75mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.017A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72261LA15TF Overview
LQFP is the package in which FIFO memory chip is contained.Memory IC's recommended mounted way is Surface Mount .A supply voltage of 5V allows for high efficiency.FIFO means contains a total of 64 terminations.There are 64 pins on the operation pins.In order for FIFO design to operate, a maximum current of 75mA is required.In order to maximize efficiency, the supply voltage should be set to 5V .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.There is a self-contained gadget within FIFOs .The IC of the part is of the type OTHER FIFO .FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.Approximately 64 pins are attached to it.With a frequency of 66.7MHz , it maintains good accuracy.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.There are normally 5V power supplies attached to the component.Using this gadget, RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH can also be generated.
72261LA15TF Features
FIFOs category
Frequency at most
72261LA15TF Applications
There are a lot of Integrated Device Technology (IDT) 72261LA15TF FIFOs Memory applications.
- A/D output buffers
- Smart Meter
- Consumer Systems
- Laser Receiver System
- Extended product-change notification
- Fabrication Site
- Temporary storage elements
- Microprogramming
- Computers
- Data-acquisition systems
