72261LA20PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Max Supply Current | 75mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Data Bus Width | 9b |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.017A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72261LA20PF Overview
You can find FIFO memory chip in the TQFP package.A Surface Mount mounting method is recommended.Supply voltages of 5V are capable of achieving high efficiency.A total of 64 terminations are contained within FIFO means.FIFO design has 64 operation pins.FIFO requires a minimum of 75mA current to operate.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is self-contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.A maximum voltage of 5.5V volts can be applied to FIFO memory.As a result, it contains a total of 64 pins.With a frequency of 50MHz , it maintains good accuracy.A FIFO memory's maximum value of 50MHz can be used for regular operation.Normally, 5V power supplies are owned by the component.It is also possible to generate RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH using this FIFO memory.
72261LA20PF Features
FIFOs category
Frequency at most
72261LA20PF Applications
There are a lot of Integrated Device Technology (IDT) 72261LA20PF FIFOs Memory applications.
- Measurement Equipment
- Queues for communication systems
- Code converters
- Tape controllers
- Microprogramming
- Temporary storage elements
- Test Equipment
- Networking
- Look-up Tables
- IP Radio
