72265LA10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 100MHz |
| Access Time | 8 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.017A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72265LA10PF8 Overview
FIFO memory chip is included in the TQFP package.It is recommended that memory IC be mounted in the Surface Mount direction.Supply voltages of 5V are capable of achieving high efficiency.As a result of this, FIFO means contains 64 terminations.64 pins are the operation pins.In order to operate it, it requires 80mA volts of current.For FIFO's maximum efficiency, the supply voltage should be set to 5V .FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.FIFOs contains this gadget in its entirety.This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 4V V, may be required for operation.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.As a result, it contains a total of 64 pins.A frequency of 100MHz is capable of maintaining good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.Normally, the component owns 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH .
72265LA10PF8 Features
FIFOs category
Frequency at most
72265LA10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72265LA10PF8 FIFOs Memory applications.
- Network switching/routing
- Seismic Data Collection at Extreme Temperatures
- Temporary storage elements
- Address mapping
- Analog-to-digital converters
- GPS Offender Tracking
- SPI Bus Flash Memory Device
- Consumer
- Data-acquisition systems
- Magnetic memories
