72265LA10TFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 100MHz |
| Access Time | 8 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72265LA10TFG Overview
LQFP is the package in which FIFO memory chip is contained.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 64 terminations.64 pins are the operation pins.Its maximum operating current is 80mA .A voltage of 5V should be used for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.This gadget is self-contained in?FIFOs .The IC of the part is of the type OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.The FIFO memory IC has a total of 64 pins.A frequency of 100MHz is capable of maintaining good accuracy.During regular operation, the FIFO memory's maximum value is 100MHz .There are normally 5V power supplies attached to the component.The gadget can also generate a value of RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH .
72265LA10TFG Features
FIFOs category
Frequency at most
72265LA10TFG Applications
There are a lot of Integrated Device Technology (IDT) 72265LA10TFG FIFOs Memory applications.
- HDD
- Test site
- Tape controllers
- Multimedia
- Extended product-change notification
- Multi-stage synchronizer
- SPI Bus Flash Memory Devices
- Look-up Tables
- IP Camera Buffer
- Game Controller
