72265LA15PF
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 18b |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.017A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
72265LA15PF Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.A total of 64 terminations are contained within FIFO means.FIFO design has 64 operation pins.In order for FIFO design to operate, a maximum current of 80mA is required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is contained within FIFOs .This part has a memory type of OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 4V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.It has a total of 64 pins on it.A frequency of 66.7MHz is capable of maintaining good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .It is normal for a component to be equipped with 5V power supplies.It is also possible to generate RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH by using this FIFO memory.
72265LA15PF Features
FIFOs category
Frequency at most
72265LA15PF Applications
There are a lot of Integrated Device Technology (IDT) 72265LA15PF FIFOs Memory applications.
- Controlled baseline
- Rate buffers
- Computer networks
- Test site
- High-speed disk
- Event Recorder
- Network switching/routing
- Analog-to-digital converters
- GPS Offender Tracking
- Game Controller
