banner_page

72265LA15PFGI8

64 Terminations5V 64 Pin FIFO memory IC10 ns Min 4V VMax 5.5V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-72265LA15PFGI8
  • Package: TQFP
  • Datasheet: PDF
  • Stock: 107
  • Description: 64 Terminations5V 64 Pin FIFO memory IC10 ns Min 4V VMax 5.5V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Package / Case TQFP
Number of Pins 64
Published 2001
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 64
ECCN Code EAR99
Max Operating Temperature 85°C
Min Operating Temperature -40°C
HTS Code 8542.32.00.71
Subcategory FIFOs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.8mm
Frequency 66.7MHz
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 64
Qualification Status Not Qualified
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4V
Element Configuration Dual
Nominal Supply Current 80mA
Max Supply Current 80mA
Frequency (Max) 66.7MHz
Access Time 10 ns
Organization 16KX18
Density 288 kb
Standby Current-Max 0.02A
Parallel/Serial PARALLEL
Sync/Async Synchronous
Word Size 18b
Memory IC Type OTHER FIFO
Bus Directional Unidirectional
Retransmit Capability Yes
Output Enable YES
Cycle Time 15 ns
Height Seated (Max) 1.6mm
Length 14mm
Width 14mm
Thickness 1.4mm
RoHS Status RoHS Compliant
Lead Free Lead Free

72265LA15PFGI8 Overview


TQFP is the package in which FIFO memory chip is contained.It is recommended that memory IC be mounted in the Surface Mount direction.It is possible to achieve high efficiency with a supply voltage of 5V .64 terminations are contained in FIFO means.Operation pins are 64 .In order to operate FIFO design, a maximum current of 80mA is required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.The gadget is self-contained and can be found in FIFOs .The IC of the part is of the type OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 4V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.This FIFO memory IC is equipped with 64 pins in total.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.During normal operation, the FIFO memory's maximum value is 66.7MHz .It is normal for a component to be equipped with 5V power supplies.

72265LA15PFGI8 Features


FIFOs category
Frequency at most

72265LA15PFGI8 Applications


There are a lot of Integrated Device Technology (IDT) 72265LA15PFGI8 FIFOs Memory applications.

  • Application that requires re-writable nonvolatile parameter memory
  • Multi-stage synchronizer
  • Battery Charger
  • Network bridges
  • MP3 Interface for Automobile
  • SPD for DDR3 Memory Modules
  • Extended product life cycle
  • Transistors
  • Tape controllers
  • Microprogramming

Write a review

Note: HTML is not translated!
    Bad           Good