72265LA15PFI8
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
72265LA15PFI8 Overview
FIFO memory chip is contained in the TQFP package.Mounting it in the Surface Mount way is recommended.A supply voltage of 5V is capable of producing high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.Operation pins are 64 .The maximum current required for its operation is 80mA .When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is self-contained in FIFOs .The IC of the part is of the type OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.Approximately 64 pins are attached to it.It is capable of maintaining good accuracy with a frequency of 66.7MHz .For regular operation, the memory logic's maximum value is 66.7MHz .Normally, the component owns 5V power supplies.
72265LA15PFI8 Features
FIFOs category
Frequency at most
72265LA15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72265LA15PFI8 FIFOs Memory applications.
- HDD
- PC peripheral
- Battery Charger
- Tape controllers
- Disk Controllers
- Code converters
- Address mapping
- SPD for DDR3 Memory Modules
- Computer networks
- Measurement Equipment
