72265LA15TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.017A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72265LA15TF Overview
LQFP is a package that contains FIFO memory chip.The recommended mounting method for this FIFO products is Surface Mount .Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains 64 terminations.As far as the operation pins are concerned, they are 64 pins.FIFO requires a minimum of 80mA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.FIFOs contains this gadget in its entirety.In this part, the memory type is OTHER FIFO .Low supply voltages, such as 4V V, may be required for operation.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.This FIFO memory IC is equipped with 64 pins in total.When the frequency is set to 66.7MHz , the system can maintain good accuracy.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.A component normally has 5V power supplies attached to it.Additionally, this FIFO memory is capable of generating RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH as well.
72265LA15TF Features
FIFOs category
Frequency at most
72265LA15TF Applications
There are a lot of Integrated Device Technology (IDT) 72265LA15TF FIFOs Memory applications.
- Digital buffering
- Data-acquisition systems
- Routers
- TVs
- Wireless
- IP Radio
- Medical Monitoring Device
- Buses
- Cameras
- Industrial Systems
