72265LA15TFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72265LA15TFI Overview
The TQFP package contains FIFO memory chip.Mounting it in Surface Mount is recommended.When the supply voltage is 5V there is the possibility of high efficiency.FIFO means contains a total of 64 terminations.Operation pins are 64 .In order to operate it, it requires 80mA volts of current.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.An operating temperature of 85°C °C is necessary for stable operation.The gadget in FIFOs is self-contained.It has a type OTHER FIFO memory IC.There is a possibility that FIFO can operate at very low supply voltages, such as 4V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.There are a total of 64 pins on this board.It is capable of maintaining good accuracy with a frequency of 66.7MHz .There is 66.7MHz FIFO memory IC's maximum value for regular operation.A component normally has 5V power supplies attached to it.
72265LA15TFI Features
FIFOs category
Frequency at most
72265LA15TFI Applications
There are a lot of Integrated Device Technology (IDT) 72265LA15TFI FIFOs Memory applications.
- Queues for communication systems
- Analog-to-digital converters
- Video time base correction
- Computers
- A/D output buffers
- Communications Systems
- Consumer
- Application that requires re-writable nonvolatile parameter memory
- Routers
- Alarm System
