72265LA20PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Data Bus Width | 18b |
| Direction | Bidirectional |
| Density | 288 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72265LA20PF Overview
You can find FIFO memory chip in the TQFP package.The recommended mounting way is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.FIFO means contains a total of 64 terminations.These are the 64 pins for operation.There is a maximum current requirement of 80mA for its operation.A voltage of 5V should be used for FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.Its maximum operating temperature of 70°C °C ensures stable operation.A self-contained gadget is contained in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 4V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.There are a total of 64 pins on this board.When the frequency is set to 50MHz , the system can maintain good accuracy.The memory logic's maximum value is 50MHz for regular operation.A component normally has 5V power supplies attached to it.Additionally, this FIFO memory is capable of generating RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH as well.Due to the use of 1 circuits, FIFO memory chip has an enhanced level of flexibility.
72265LA20PF Features
FIFOs category
Frequency at most
72265LA20PF Applications
There are a lot of Integrated Device Technology (IDT) 72265LA20PF FIFOs Memory applications.
- Networking
- Optical memories
- Disk Controllers
- Analog-to-digital converters
- Data-acquisition systems
- IP Camera Buffer
- Digital buffering
- Computer Systems
- Tape controllers
- Battery Charger
