72265LA20PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.017A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72265LA20PF8 Overview
You can find FIFO memory chip in package TQFP .The recommended mounting way is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.FIFO consists of 64 terminations, which indicates that FIFO means is empty.64 pins are used for operation.FIFO design requires a maximum current of 80mA to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.A self-contained gadget is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.The FIFO memory chip may be operated at very low supply voltages, such as4V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.There are a total of 64 pins on this board.It is capable of maintaining good accuracy with a frequency of 50MHz .Normally, the FIFO memory's maximum value is 50MHz .It is normal for the component to own 5V power supplies.With the help of this FIFO memory, RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH can also be generated.
72265LA20PF8 Features
FIFOs category
Frequency at most
72265LA20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72265LA20PF8 FIFOs Memory applications.
- Video
- Alarm System
- Industrial Systems
- One assembly
- Data
- Network bridges
- Data-acquisition systems
- Test site
- Character generators
- Video time base correction
