72265LA20PFI
| Parameters | |
|---|---|
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 80mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 16KX18 |
| Standby Current-Max | 0.017A |
| Memory Density | 294912 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
72265LA20PFI Overview
FIFO memory chip can be found in the TQFP package.Mounting it in Surface Mount is recommended.An input voltage of 5V results in high efficiency.As a result of this, FIFO means contains 64 terminations.There are 64 pins on the operation pins.FIFO design requires a maximum current of 80mA to operate.A voltage of 5V should be used for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO may operate at a very low supply voltage, such as 4V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.There are a total of 64 pins on this FIFO memory IC.Regular operation has a FIFO memory's maximum value of 50MHz .A component normally has 5V power supplies attached to it.Using this gadget, RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH can also be generated.
72265LA20PFI Features
FIFOs category
Frequency at most
72265LA20PFI Applications
There are a lot of Integrated Device Technology (IDT) 72265LA20PFI FIFOs Memory applications.
- Measurement Equipment
- Routers
- Code converters
- Computer networks
- SPI Bus Flash Memory Device
- Wireless
- Test site
- Test Equipment
- Notebook
- Cardiac Monitoring Device
