72265LA20PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.017A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72265LA20PFI8 Overview
FIFO memory chip is included in the TQFP package.You'll find it packaged in the shape of a Tape & Reel .A Surface Mount mounting method is recommended.When the supply voltage is 5V , high efficiency is possible.64 terminations are contained in FIFO means.As far as the operation pins are concerned, they are 64 pins.FIFO design requires a maximum current of 80mA to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.85°C °C is the memory logic's maximum operating temperature that allows stable operation.In FIFOs , there is a self-contained gadget.A OTHER FIFO memory type IC is used in the part.FIFO may operate at very low supply voltages, such as 4V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.The FIFO memory IC is equipped with a total of 64 pins.When the frequency is set to 50MHz , the system can maintain good accuracy.For regular operation, the memory logic's maximum value is 50MHz .Normally, 5V power supplies are owned by the component.It is also possible to generate RETRANSMIT; AUTO POWER DOWN; EASY EXPANDABLE IN DEPTH AND WIDTH with the use of this FIFO memory.
72265LA20PFI8 Features
FIFOs category
Frequency at most
72265LA20PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72265LA20PFI8 FIFOs Memory applications.
- Consumer
- Test site
- Video
- Thermal Management for DDR3 Memory Modules
- Game Controller
- SPI Bus Flash Memory Devices
- Measurement Equipment
- Data-acquisition systems
- High-speed disk
- Game Consoles
