Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
64 |
Published |
2009 |
Part Status |
Active |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Frequency |
66.7MHz |
Operating Supply Voltage |
5V |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
75mA |
Max Supply Current |
75mA |
Frequency (Max) |
66.7MHz |
Access Time |
10 ns |
Direction |
Unidirectional |
Density |
288 kb |
Sync/Async |
Synchronous |
Word Size |
9b |
Bus Directional |
Unidirectional |
Retransmit Capability |
Yes |
FWFT Support |
Yes |
Programmable Flags Support |
Yes |
Length |
14mm |
Width |
14mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
72271LA15PF Overview
You will find FIFO memory chip in the TQFP package.The recommended mounting method for this FIFO products is Surface Mount .There are 64 pins on the operation pins.In order for FIFO design to operate, a maximum current of 75mA is required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.The memory logic's maximum value is 66.7MHz for regular operation.
72271LA15PF Features
Frequency at most
72271LA15PF Applications
There are a lot of Integrated Device Technology (IDT) 72271LA15PF FIFOs Memory applications.
- Smart Meter
- Rate buffers
- High-speed disk
- Controlled baseline
- Tape controllers
- Computer Systems
- Buses
- Network switching/routing
- Telecommunication
- Event Recorder